ul-900.7

Air Filter Units

UL 900

1 Scope

1.1 These requirements cover tests to determine the amount of smoke generated and the combustibility of air filter units of both washable and throwaway types used for removal of dust and other airborne particles from air circulated mechanically in equipment and systems installed in accordance with the Standards for Installation of Air Conditioning and Ventilating Systems, NFPA 90A (Other Than Residence Type), Installation of Warm Air Heating and Air Conditioning Systems, NFPA 90B (Residence Type), the International Mechanical Code, the International Fire Code, and the Uniform Mechanical Code.

1.1 revised effective May 31, 2012

1.2 Since the smoke generation of an air filter unit, as well as its combustibility, depends upon the nature and quantity of the material collected by the filter, the test requirements of this standard, for classification purposes, apply only to air filter units in a clean condition. Consequently, when filters are susceptible to the accumulation of combustible deposits, it is intended that maintenance and inspection practices should be followed as proposed in Appendix B of NFPA 90A.

1.2 revised effective May 31, 2012


UL 900 does not reference any other UL Standards.

Table of Contents for UL 900.