1.1 These requirements cover the investigation of air leakage through door assemblies installed in wall openings where air leakage is intended to be controlled.
1.2 The purpose of the test is to determine only the resistance of a door assembly, in the closed position, to air leakage resulting from a specified air pressure difference applied across the surface of the entire door assembly.
1.3 These requirements apply to complete door assemblies or to gasketing systems intended for use with specific door assemblies.
1.4 The test method includes air leakage tests and cycling tests to determine the rate of air leakage through a door assembly in an as-installed condition.
1.5 The results obtained by use of this test method are expressed in cubic feet per minute per square feet (m3/s per m2) of door opening and are intended to develop data to assist authorities having jurisdiction, and others, in determining acceptability of a door assembly or gasketing system with reference to control of air movement through an assembly.
1.6 A door assembly or gasketing system investigated by this test method is intended for installation and use in accordance with the
Standard for the Installation of Smoke Door Assemblies, NFPA 105.
1.7 Deleted December 17, 2004
UL 1784 does not reference any other UL Standards. Table of Contents for UL 1784.
UL 1784 does not reference any other UL Standards.
Table of Contents for UL 1784.