The following is being proposed for preliminary review and comment only:
1. For Preliminary Review Only: Revision to Clause 1.2 to add box clamps to the list of products that are covered by this standard
2. For Preliminary Review Only: Revision of Clause 5.1.3.1 and addition of new Clauses 7.20.1, 7.20.2 and 8.5A to provide construction, marking, and performance requirements needed to evaluate fittings with alternative corrosion protection
3. For Preliminary Review Only: Revision to Clauses 5.2.1.2 and 5.2.1.4 to add references to ANCE Mexican national standards to align with the referenced CSA and UL standards
4. For Preliminary Review Only: Revision to Clause 7.12.3 to specify that the largest two-conductor cable size is not required to be marked for metal-clad cable
5. For Preliminary Review Only: Revision to Clauses 6.2.3, 8.14.1.1, and 8.21.1.1 to clarify test requirements and add marking requirements specific to Type ACG90 and Type ACGWU90
6. For Preliminary Review Only: Revision to Clause 8.20.6.1 to add a note referencing NMX-T-152-SCFI and ASTM-D-792 to provide information on measuring the specific gravity of PVC
7. For Preliminary Review Only: Revision to Clause 8.24 to specify that cable clamps intended for use with non-metallic sheathed cables and the corresponding fittings shall be subjected to the tests specified in Clause 8.24
8. For Preliminary Review Only: Revision of Clause 6.1.1 and addition of Clause 6.2.4 to clarify that for assemblies, other than flexible metal conduit fittings and armored cable and aluminum sheathed cable, the manufacturer can specify the assembly torque
9. For Preliminary Review Only: Revision of Clause 8.27.2.1 to not allow any deformation of a metal gland or a direct-bearing metal clamp during assembly for testing and addition of new Clause 8.27.2.4 to allow use of mandrels as substitutes for tray cable during the assembly test
10. For Preliminary Review Only: Editorial changes to Clauses 2.2 and 8.12.1.2 and Annex A to update the reference to CSA C22.2 No. 45 and to add references to NMX-J-565/3-ANCE-2006, NMX-T-152-SCFI-2004, and ASTM ASTM-D-792-00